EngineMaxx is the best multi-functioning oil additive to improve the service life of your machinery.
A balanced Group II hydrocracked engine oil formula designed for gasoline engine oils with API SM/SN and ILSAC GF-5 specifications.
EngineMaxx is designed to:
- blend with engine oils
- protect equipment under severe conditions
- extend service life of machinery
EngineMaxx increases service life by improving:
- ability of the oil to neutralize contaminants and acidic by-products
- sheer stability and oxidation resistance
- wear protection with proprietary lubrication chemistry and additive technology
EngineMaxx is compatible with mineral based (Group II + III) and synthetic-based polyalphaolefin and diester (Group IV) engine oils bearing API service categories SM, SN. EngineMaxx contains no solid particles or heavy metals and is compatible with manufacturer specifications for extended service engine oils.
EngineMaxx LA is designed for improving combustion engine performance and enhances maintenance practices.
EngineMaxxLA is designed to:
- blend with engine oils
- protect equipment under severe conditions
- extend service life of machinery
EngineMaxxLA increases service life by improving:
- ability of the oil to neutralize contaminants and acidic by-products
- sheer stability and oxidation resistance
- wear protection with proprietary lubrication chemistry and additive technology
EngineMaxxLA is compatible with mineral based Group II + III) and synthetic-based polyalphaolefin and diester (Group IV) engine oils bearing API service categories CJ-4, SM, SN and ILSAC GF-5 specifications. EngineMaxxLA contains no solid particles or heavy metals and is compatible with manufacturer specifications requiring low-ash (SAPS) oil content. EngineMaxxLA: Use with API CJ-4 diesel oils or high mileage oils with API SM/SN. Intended for internal combustion engines. Also compatible with API service categories before SM / CJ-4.
HydraMaxx is designed to meet the specific needs of hydraulic systems and typically focus on anti-wear.
Hydraulic oils contain specific additive formulas designed to meet the specific needs of hydraulic systems and typically focus on anti-wear (AW), rust and oxidation (RO) or multi-viscosity (MV) formulas.
HydraMaxx is a balanced formula designed to blend with these oils to complement and enhance the protection of equipment under difficult performance requirements where the oil alone proves inadequate. Power transfer may still occur when using oil which has surpassed useful service life. When this occurs many of the key performance aspects of the oil are no longer functioning.
HydraMaxx enhances:
- cold flow
- viscosity index
- water separation and unparalleled anti-wear
- rust and corrosion protection
HydraMaxx also uses seal conditioning agents, reducing the long-term effects of heat exposure to elastomer seals and hydraulic hoses. HydraMaxx is compatible with mineral based (Group II + III) and synthetic-based polyalphaolefin and diester (Group IV) hydraulic oils. HydraMaxx is not recommended for use with water-based fluids, phosphate esters or polyglycol fluids. HydraMaxx: Use with hydraulic oils. 5% HydraMaxx to oil volume ratio is the recommended concentration for most applications. For extreme cold applications higher concentrations may be needed to obtain desired results.
GearMaxx is designed for long term wear protection in cold conditions.
Extreme pressure gear oils (API GL-3, GL-4, GL-5, SAE J2360) contain specific additive formulas designed to provide long term wear protection.
GearMaxx is a commercial additive package designed to blend with these oils to complement and enhance the protection of equipment under difficult performance requirements where the oil alone proves inadequate. Conventional EP additives generally require elevated temperatures to initiate their film strength. The enhanced high strength protective film becomes much less temperature dependent when using GearMaxx; providing better protection on start up and in cold weather applications.
GearMaxx is compatible with mineral based (Group II +III) and synthetic-based polyalphaolefin and diester (Group IV) gear oils. GearMaxx is not recommended for use with water based fluids, phosphate esters or polyglycol fluids. GearMaxx: Use with SAE J2360, API GL-3, GL-4, and GL5 gear oils 5% GearMaxx to oil volume ratio is the recommended concentration for most applications. Oil monitoring is highly recommended when using concentrations greater than 5% Gear Maxx.
COMING SOON
COMING SOON